Changing the Oil in a Riding Lawn Mower

Hi, Wayne here from Sears PartsDirect. Today we're going to change the engine oil in a riding mower. Engine oil helps your riding mower engine run smoother and last longer by lubricating engine parts to reduce friction. Over time, engine oil gets dirty with particles that can abrade engine parts. Do an oil change as often as recommended in your owner’s manual, or at least once a year. The

first step is to gather the supplies for the oil change. You need engine oil—use the type and amount recommended in your owner's manual. For this riding mower, we'll use 10W-30, which lubricates well at typical mowing-season temperatures. If you lost the oil drain tube that came with your mower (like I did), you’ll need a new one. This little hose helps you drain the oil directly into the drain

pan without making a mess. Of course, you need a drain pan or container to catch the old oil. Use a container with a spout or a cover so you can carry the old oil to a collection facility after the oil change. This mower uses an oil filter, so you'll need one of those for this oil change, too. Also grab a strap wrench to loosen and tighten the oil

filter. Once you gather the supplies, run the mower for a few minutes in a well-ventilated area. This will warm the oil so it drains easily. Park the mower on a level surface. Set the parking brake and remove the ignition key. Lift the hood and disconnect the spark plug wire (or wires if your engine has more than one cylinder). Now we're ready to get started. To give you a better

view, we’ve removed the hood. Remove the fastener from the lower right dash cover. Carefully slide the dash cover up slightly to release the locking tabs and remove the cover. Remove the oil drain valve cap and install the oil drain tube. Put an oil pan under the drain tube to catch the draining oil. Push in and turn the drain valve counterclockwise to unlock it and then pull the drain valve outward

to open. Remove the oil dipstick, taking care to keep debris out of the dipstick opening. Let the engine oil drain until it stops completely. Push the drain valve in and turn clockwise until the pin locks. Remove the oil drain tube and reinstall the drain valve cap. Reinstall the dash cover and secure it with the fastener. Now that we've drained the oil, we'll replace the oil filter. Remove the fastener from

the lower left dash cover and pull off the cover to access the oil filter. Move the oil drain pan under the oil filter to catch drips from the filter. Use a strap wrench to turn the oil filter counterclockwise to unlock it. Remove the filter and wipe off any oil spills off the mower frame. Lubricate the new oil filter's seal with a light coat of new oil. Position the new

filter on the engine and turn the filter clockwise to lock it in place. Pull the oil drain pan from under the mower. Reinstall the dash cover and secure it with the fastener. The final step is to add the new...

See more here: https://www.youtube.com/watch?v=G9ZVoeqr6R8

Follow This Great Article About Woodworking To Help You

Woodworking is a very valuable ability to have and is likewise a form of art. The world of woodworking has many things to provide to those who enjoy it. Woodworking can be a task that pays well or it can just be a satisfying weekend hobby that is unwinding and innovative.

Evaluate out spots on a hidden spot. This will offer you a concept of what it will appear like on the completed project. It is not simple to guess how wood stain will turn out; therefore, you must always check out the stain on a piece of wood to avoid disappointment.

If you are bored using power tools for your woodworking project, attempt your hand at utilizing classic handbook tools. For centuries individuals utilized no power in their woodworking. Everything was done by hand. It is a tough method to add some enjoyment and pride to your next woodworking job.

Register for a woodworking or shop class at a local school. You can definitely teach yourself a lot about woodworking, but there's nothing better than learning from a professional. You'll pick up crucial skills far more quickly, and you'll make a great deal of great friends along the way.

Before you cut into a piece of wood, you need to examine it to make sure there are not any pieces of metal in the wood. Screws, nails, staples and other metallic object will not just damage your blades, however likewise posture a security threat. Always inspect the wood prior to you cut.

Find out about utilizing pilot holes. This is pretty easy to do. When owning a screw or hammering a nail into a little piece of wood or getting quite near to the edge of a piece, it tends to split. Often it's inescapable to put a fixing into a place like this. Nevertheless, drilling a hole through the joint that's a bit smaller than the fixing can avoid it from splitting.

If dust and dirt get into the holes of a brad or nail gun while they are not in use, this can cause them to wear quicker. It is a smart idea to plug the air inlet holes up with something to prevent anything from acting.

Something fantastic to do is read plans before beginning if you are simply beginning woodworking. Make sure you have a complete understanding of exactly what you have to do, and make certain the info is complete. If you can not comprehend them or something is missing, someone from a regional house improvement center might be able to assist you.

Never ever permit someone to enjoy while you are woodworking without wearing the same equipment that you are wearing. Being anywhere near the tools is a danger, even if they are not utilizing them. Wood or parts of the tool might fly into the air and strike them just as they might you.

As you understand, there are lots of elements to woodworking. It is a skill that can be used to make an excellent living or it can be a simple activity to take pleasure in throughout your spare time. But for whatever reason you decide to do woodworking, the pointers above can help you to become even much better.


If you are tired using power tools for your woodworking task, try your hand at utilizing traditional handbook tools. For hundreds of years people utilized no power in their woodworking. It is a tough way to include some excitement and pride to your next woodworking job.

If you are just starting woodworking, something excellent to do is check out strategies before starting. For whatever factor you choose to do woodworking, the ideas above can assist you to become even better.
Hi, Wayne here from Sears PartsDirect. Today we're going to change the engine oil in a riding mower. Engine oil helps your riding mower engine run smoother and last longer by lubricating engine parts to reduce friction. Over time, engine oil gets dirty with particles that can abrade engine parts. Do an oil change as often as recommended in your owner’s manual, or ...