Dewalt DCN660D1 20V 16ga Cordless Finish Nailer Review

Get the Dewalt DCN660D1 on Amazon: http://amzn.to/1RvF6nA
Dewalt has added another cordless nailer to their growing line of 20 volt max tools. The DCN660 is a 16 gauge finish nailer that is very close to the speed of a pneumatic nailer. This finish nailer has two switchable modes for sequential and bump feeds. The bump feed allows you to hold the trigger and use the bump safety to drive nails quickly or you can also hold down bump safety by dragging it across the wood and use the trigger to fire nails very fast. These two modes allow for a lot of nails to be fire in a very short period of time.

Dewalt claims that you can shoot 800 nails per charge of the compact 2.0Ah battery. We fell slightly short of that while testing this unit putting trim up in our shop and also out on the construction site while finishing a 1,800 square foot home. We found that you can easily get 550 to 700 nails placed in a real world setting. We all agree that you could get closer to 800 if you were using the bump mode more often.

See more here: https://www.youtube.com/watch?v=oOkpRYI_HTQ

You can drive slim finish nails through boards of hardwoods and softwoods, as well as manufactured products like MDF, while leaving behind a really tiny nail hole which you could fill up conveniently with a timber filler. Another advantage of having to use a thin nail is that, you're less likely to split delicate trim boards compared to utilizing bigger types of nails or also timber screws.

In addition to working quicker as compared to the standard hammers, this type of nailer can quickly be utilized with simply one hand - providing you an extra hand to hold the trim in place. Straight or angled type nailers could use nails which range from evaluates 15-18 and can be found in strips of 50 to 100.

About the safety functions of these best cordless finish nailer 2017 , they typically have a risk-free nose which needs to be depressed prior to its trigger is involved and also be drawn. For most types, they will additionally include an anti-marring tip made of rubber. This suggestion is made to be slipped on top of the nose's pointer to avoid the nailer from possibly providing damage to the timber and molding which is being fingernailed.

When you're utilizing the surface nailer, have the idea placed on to the trim board where you want to have actually the nail driven. Generally, when the finish nailer's cylinder as well as its tip line up perpendicularly to the board's face, it gets your nail driven squarely in the board.

When you have effectively lined up the nailer, press it carefully toward the timber as well as dispirit its safety and security nose before pulling on the trigger. If you do things right, you need to get the nail driven straight in the trim at your wanted angle.

When you're purchasing finish nailers for the first time, the inquiry you should choose between a pneumatic or cordless type. The pneumatically-driven kind of nailer utilizes an air compressor to power it as well as on the other hand, the cordless nailer uses a combination of the pressed air canister air and a rechargeable battery in driving the nail via supply. Obviously, an advantage with a cordless device is not having actually a cable affixed to it but it might be a little bit larger due to the battery.

When you work on a surface nailer, you require the head to be simply listed below the board's surface area so it can be filled quickly with the nail filler. If your nails haven't been sunk entirely, you can use a hammer and also a nail set to drive them in entirely (although, this is extra job which you should not have to do if you do things ideal).


You could drive thin surface nails with boards of softwoods and also hardwoods, as well as produced items like MDF, while leaving behind a really little nail opening which you could load quickly with a wood filler. An additional benefit of having to utilize a thin nail is that, you're less most likely to split delicate trim boards compared to using bigger types of nails or even wood screws.

The pneumatic kind of nailer uses an air compressor to power it as well as conversely, the cordless nailer makes use of a mix of the compressed air container air and also a rechargeable battery in driving the nail through stock. If your nails haven't been sunk totally, you can make use of a hammer and a nail established to drive them in entirely (although, this is added job which you should not have to do if you do things ideal).
Get the Dewalt DCN660D1 on Amazon: http://amzn.to/1RvF6nADewalt has added another cordless nailer to their growing line of 20 volt max tools. The DCN660 is a 16 gauge finish nailer that is very close to the speed of a pneumatic nailer. This finish nailer has two switchable modes for sequential and bump feeds. The bump feed allows you to hold the trigger and use the bump safety to drive nails quickly or you can also hold down bump safety by dragging it across the wood and use the trigger to fire nails very fast. These two modes allow for a lot of nails to be fire in a very short period of time.Dewalt claims that you can shoot 800 nails per charge of the compact 2.0Ah battery. We fell slightly short of that while testing this unit putting trim up in our shop and also out on the constructio...