How to Make A Hand Router Plane With Hand Tools Building Tutorial

Watch more hand tool fun here http://vid.io/xoYa
This is how I made a router plane by hand. The stock is out of 1-inch mahogany, and the iron is made from an old chisel that I had on hand. The pattern for the router can be found on Google by searching for router plane pattern. I cut out the stock with a coping saw and then shaped it with a spoke shave rasps and other shaping tools. The hole was cut with a brace and bit. And then the shaft for the iron was cut out with a quarter-inch chisel. The iron was heated up with a propane torch and bent to shape. Then it was hard and in vegetable oil. After that, its at in the oven at 450 degrees for a little over an hour and slowly cooled over the next hour. It is attached to the frame with to quarter inch thumbscrews.

A quick Tutorial on how to Make a Hand Router plane

Patern I used http://www.inthewoodshop.com/ShopMade...

SUBSCRIBE
https://www.youtube.com/c/woodwright?...

QALO Ring I wear and $5 off
https://share.qalo.com/v2/share/62871...

You Can find me:
Lumber Jocks: http://lumberjocks.com/Sarahsliefie
Instagram: https://www.instagram.com/woodbywright/
Facebook: https://Facebook.com/WoodByWright
Beme: WoodByWright
Periscope: @WoodByWright
Website: http://WoodByWright.com
Patreon: http://patreon.com/woodbywright

See more here: https://www.youtube.com/watch?v=cJZhPc7r7bM

Recently I was a complete newbie when it concerned timber working. Exactly what I swiftly found out is that timber functioning jobs are very easy if you begin with a complete strategy. It could commonly be more challenging to find a great plan compared to it is to actually construct an item.

Obtaining Started in Woodworking is Easy When You Have a Strategy. I can manage all the fundamental timber working tools, it's just that I can not prepare as well as picture out my next fantastic task. I just didn't know exactly how to intend and make my project.

Not All Strategies Are Developed Equal. I went on the net looking for some woodworking project intends that I could download and install. I located one website that had several fantastic plans. I picked a strategy for an amazing looking magazine holder. Clicked the download switch as well as found out that this website that supplies all these "free" strategies wanted me to pay $18 for the task strategy.

After more browsing I discovered a website that truly was supplying cost-free strategies yet they did not have photos and also detailed sketches. Let me inform you that these are a must if you are wanting to construct anything,

The Perfect hand router plane Plan. What should you look for in a Wood working project plan? Clearly very easy to review sketches as well as photos of the completed project are a massive demand. A comprehensive product listing as well as a listing of the called for devices must be included. It is also a big help when the strategy gives you the estimated time to finish the job and also provides some suggestion of the skill degree required for the task.

, if you are tired of looking all over for wonderful plans click the web link below to find out how to get 14,000 comprehensive wood working projects.
.


What I rapidly found out is that wood functioning tasks are very easy if you begin with a total plan. Clicked the download button and also discovered out that this website that provides all these "free" plans desired me to pay $18 for the task strategy.

What should you look for in a Wood working job strategy? It is likewise a huge assistance when the strategy provides you the estimated time to finish the job and uses some suggestion of the ability level needed for the project.
Watch more hand tool fun here http://vid.io/xoYaThis is how I made a router plane by hand. The stock is out of 1-inch mahogany, and the iron is made from an old chisel that I had on hand. The pattern for the router can be found on Google by searching for router plane pattern. I cut out the stock with a coping saw and then shaped it with a spoke shave rasps and other shaping tools. The hole was cut with a brace and bit. And then the shaft for the iron was cut out with a quarter-inch chisel. The iron was heated up with a propane torch and bent to shape. Then it was hard and in vegetable oil. After that, its at in the oven at 450 degrees for a little over an hour and slowly cooled over the next hour. It is attached to the frame with to quarter inch thumbscrews....