Installation of the DeeZee Truck Bed Extender on a 2013 Ford F-250 - etrailer.com

https://www.etrailer.com/be-2013_Ford...

Today on our 2013 Ford F-250 Super Duty, well be installing the Dee Zee custom truck bed extender part number DZ17221.With the bed extender unfolded, and the latch pin braces already assembled according to the included instructions, well be using the second set of hands to put the tube of the drivers side lower bracket over the drivers side post. Well then rotate the bed divider down to allow the tube with the notch on the passenger side lower brace to slide on the tailgate post on the passenger side. This process is similar to removing it. With the bed extender in place, well hold the bed extender in line with the truck bed and tighten the latch pin bracket bolts using a 13 mm wrench or a ratchet. Well then repeat the same process for the other side.Now with our bed extender secured to the bed of our truck, were ready to install the brackets which secure to the end panels of the bed extender. The three smaller holes will secure it to the outside of the panels, and the larger hole well start by using this large gold bolt, which well thread a nut on first, then insert the nut through the large hole at the top, and then thread on our other gold nut.

Note: Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

See more here: https://www.youtube.com/watch?v=3LDFQW6Qh9w

Moving day has arrived and it is time to move your belonging from your studio apartment to your new, large one. It would seem this would be a simple task. After all, you do not own all that much. All it will take is a trip or more, right? Uh oh, it looks like that sofa is hanging off the end of the bed. Now, it would seem this little moving venture is going to take more journeys than at first thought. The bed is simply not the right size for such a move. Exactly what a shame you do not have a bed extender connected to the truck.

Again, considering the above is simply and illustrative example of a possible future circumstance, you still have time to buy that bed extender truck accessory. As the name would indicate, a bed extender is an attachment that is put on the truck's bed to give it an additional foot or more. By increasing the length and volume of the truck's bed, the ability to put more items on the truck is possible. This has a number of benefits with the most essential being that a a great deal of items can be packed in the bed securely and orderly. It would be quite self-defeating to crunch a lot of products into a truck in a way where they might be damaged. A bed extender prevents this problem.

Now, in our earlier example the scenario of a one time relocation from home to house was supplied. Taking two or three additional roundtrips that could have been eliminated with a truck bed extender might cost an extra $20. Most awful of all, the size of the bed just isn't really cutting it and this is assisting in the additional trips.

In a manner, if fuel efficiency is a concern then purchasing a bed extender would eventually spend for itself. A quality bed extender can be purchased and if it reduces a variety of unnecessary journeys then it will quickly recoup its cost by removing a substantial amount of extra gas. Yes, an extender does feature a variety of financial benefits and benefits when you stop and think about it.


The bed is just not the best size for such a relocation. As the name would imply, a bed extender is an attachment that is positioned on the truck's bed to offer it an extra foot or two. Taking 2 or three extra roundtrips that could have been eliminated with a truck bed extender might cost an additional $20. Most awful of all, the size of the bed just isn't really cutting it and this is assisting in the extra journeys. A quality bed extender can be purchased and if it cuts down on a number of unneeded trips then it will easily recoup its cost by removing a substantial amount of additional gas.
https://www.etrailer.com/be-2013_Ford...Today on our 2013 Ford F-250 Super Duty, well be installing the Dee Zee custom truck bed extender part number DZ17221.With the bed extender unfolded, and the latch pin braces already assembled according to the included instructions, well be using the second set of hands to put the tube of the drivers side lower bracket over the drivers side post. Well then rotate the bed divider down to allow the tube with the notch on the passenger side lower brace to slide on the tailgate post on the passenger side. This process is similar to removing it. With the bed extender in place, well hold the bed extender in line with the truck bed and tighten the latch pin bracket bolts using a 13 mm wrench or a ratchet. Well then repeat the same process for the other side.Now with our bed extender secured to the bed of our truck, were ready to install the brackets which secure to the end panels of the bed extender. The three sm...