Making a spoon with a gouge and spokeshave | Paul Sellers

In this video Paul Sellers shows how to make a spoon with a few simple tools. Paul advocates shaping wood as an entry level project that helps introduce people to wood structure and properties.

To find out more about Paul Sellers or the projects he is involved with visit http://paulsellers.com

See more here: https://www.youtube.com/watch?v=krAIHRCx9R0

A mitre saw allows you making angled cross cuts.

Let us take an easy example of an image framework. You have a lengthy piece of spokeshave that you wish to cut into four items to earn up the framework. Instead of simply signing up with the items together so they are straightened at 90 degrees to each other, you prefer to make a mitre joint.

Just what is a mitre joint? Assume of a photo frame you have seen recently and you need to notice that most of them are made in this way.

Why Make A Mitre Joint?

In general, a mitre joint is taken into consideration an eye-catching joint, specifically for frameworks (image or otherwise). When the depth of the joint ends up being higher after that stronger options such as syncs might be taken into consideration.

In some cases a pipe is signed up with using a mitre saw to produce the joint. In some such circumstances there may also be no other feasible choice.

Handbook Mitre Saw

This features a steel base onto which a backsaw is positioned as well as has the ability to freely revolve. Since this permits for greater accuracy in cutting, a backsaw is used.

The base contains vice clamps onto which you could safeguard your item of timber. Leading rods after that permit you to repair the angle at which you wish to saw. This is a very similar principle to the initial "mitre box".

Mitre Box

The mitre box comes before the hands-on mitre saw yet the principle is much the same.

It is nothing greater than an open ended and also open top box with slots cut in it. It is generally made of timber or plastic.

The concept is that you position your piece of timber inside package then position your saw with the guides and also begin to reduce. The guides are typically evaluated 45 and also 90 degrees. Some designs feature 60 degrees, 30 degrees and other less typical angles.

It excels method to secure your work to a bench however if you are reducing small pieces after that you can commonly do without.

Powered Mitre Saw

The above gadgets are usually just great for making image frames and also comparable buildings.

For larger applications you could discover it more reliable to make use of a power tool. Likewise, the price of such devices has actually dropped significantly in the last couple of years.

A powered mitre saw typically showcases an aluminium base over which is installed a round saw. The saw can be revolved around the base and locked right into setting at whatever angle you choose.

A selection of different designs are readily available on the market. The most fundamental is a sliding saw. The saw has the ability to glide along a rail and also this means that it can reduce to larger than its very own size. One more preferred variation is a substance saw. This allows you to not just angle your cut but likewise to tilt the blade at the same time.


Instead of merely joining the items with each other so they are straightened at 90 degrees to each various other, you choose to make a mitre joint.

What is a mitre joint? This is an extremely comparable concept to the initial "mitre box".

The idea is that you place your piece of spokeshave inside the box as well as then put your saw with the overviews as well as start to reduce. The saw is able to slide along a rail and also this implies that it could cut to larger than its very own diameter.
In this video Paul Sellers shows how to make a spoon with a few simple tools. Paul advocates shaping wood as an entry level project that helps introduce people to wood structure and properties. To find out more about Paul Sellers or the projects he is involved with visit http://paulsellers.comSee more here: https://www.youtube.com/wa...